BESco
TSD Seminar/Training
Schedule for 2008
| Meeting
Date |
Meeting
Subject |
Meeting/Training
Subject Description |
Participation
Recommendation |
Presented
by |
RSVP
Date |
Meeting
Site |
1/18/08 - 8:30
am - 2:00 pm |
Metering 101A - The Foundation
of Metering |
Basic metering terminology,
metering math, meter forms, basic demand and power factor principles and
meter multipliers |
Recommended for new
metering personnel in addition to review for experienced metering personnel.
Please bring your calculator |
BESco Technical Services Staff |
1/16/08 |
Brownstown, IN |
| 2/5/08 - 8:30 am - 4:30 pm |
TS2 Trouble Shooting
Techniques & Command Center |
Joe Thomas
and staff will be providing training and troubleshooting techniques for
the TS2 and Command Center System. |
Recommended
for Meter Personnel, TS2 Coordinators and Command Center Operators. |
Joe Thomas - Hunt
Technologies |
1/30/08 |
Brownstown, IN |
2/6/08 - 8:30
am - 3:00 pm |
TS2 Trouble Shooting Techniques
& Command Center |
Joe Thomas and staff
will be providing training and troubleshooting techniques for the TS2
and Command Center System. |
Recommended for Meter
Personnel, TS2 Coordinators and Command Center Operators. |
Joe Thomas - Hunt Technologies |
1/30/08 |
Brownstown, IN |
2/7/08 - 8:30
am - 4:30 pm |
TS1 Trouble Shooting Techniques
& Command Center |
Joe Thomas and staff
will be providing training and troubleshooting techniques for the TS1
and Command Center System. |
Recommended for Meter
Personnel, TS1 Coordinators and Command Center Operators. |
Joe Thomas - Hunt Technologies |
1/30/08 |
Brownstown, IN |
2/8/08 - 8:30
am - 2:00 am |
TS1 Trouble Shooting Techniques
& Command Center |
Joe Thomas and staff
will be providing training and troubleshooting techniques for the TS1
and Command Center System. |
Recommended for Meter
Personnel, TS1 Coordinators and Command Center Operators. |
Joe Thomas - Hunt Technologies |
1/30/08 |
Brownstown, IN |
2/14/08 - 8:30
am - 2:00 pm |
Programming KV, KV2 & KV2c
Solid State Meters |
Programming KV Meters.
This will enhance your learning experience no matter what your computer
skills are. Using your laptop PC we will work with programming software
to develop proper programs per specific metering applications. Simple
Kwh & Demand programs will be developed as well as the more complicated
Time of Use - Power Quality & Load Profile Recording programs. Discussion
of Daylight Savings Time. Updated MeterMate software will be issued to
participants. |
Recommended for Metering
Personnel responsible for programming meters. Please bring your laptop
and please update you PC with the latest Windows updates prior to the
class. If you need help with this, please call us. |
GE & BESco Technical Services
Staff |
2/13/08 |
Brownstown, IN |
2/15/08 - 8:30
am - 10:30 am |
Safety in Metering - The Foundation
of Metering |
Students will learn
how to work with metering equipment safely. Discussions on instruments
transformers and meter bases. |
Recommended for Linemen,
Meter Technicians, Meter Readers, Front Line Supervisors. If you have
personnel working on or around metering, they need meter safety training.
Please bring your calculator. |
BESco Technical Services Staff |
2/13/08 |
Brownstown, IN |
2/15/08 - 10:30
am - 2:00 pm |
Basic Electricity 101 |
Students will learn
the fundamentals of electricity that will enhance their learning of metering
technologies. This will be a down to earth learning experience. |
Recommended for Linemen,
Meter Technicians, Meter Readers, Front Line Supervisors. If you have
personnel working on or around metering, they need meter safety training.
Please bring your calculator. |
BESco Technical Services Staff |
2/13/08 |
Brownstown, IN |
3/14/08 - 8:30
am - 2:00 pm |
Principles of Instrument Transformers
- Sizing Metering to the Load |
Detailed information
on Current and Voltage Transformers, Multipliers. Detailed focus on proper
selection and sizing of Revenue Metering to Secondary and Primary Loads.
Special emphasis will be on sizing your metering to the load properly. |
Recommended for metering
and engineering personnel responsible for determining proper metering
installation on customer service. Please bring your calculator |
BESco Technical Services Staff |
3/18/08 |
Brownstown, IN |
4/18/08 - 8:30
am - 2:00 pm |
Demand Metering - Understanding
Power Factor |
An in-depth class on
understanding Demand and Power Factor and how to properly apply the metering.
Some discussion will be on Power Factor Correction. |
Recommended for metering
and engineering personnel responsible for determining proper metering
installation on customer service. Please bring your calculator |
BESco Technical Services Staff |
4/16/08 |
Brownstown, IN |
5/16/08 - 8:30
am - 2:00 pm |
Siemens Regulators & Control
Panel Training |
Mark Mande of Siemens
Power T&D will be at the Brownstown TSD facility to train Brownstown
personnel and their customers on the ABC's of regulators and Siemens MJX
and MJXL Control Panels. Mark will go through the terminology associated
with voltage regulators, how to set up and program the control panel.
This class is good for old-timers and folks just learning how to use the
MJX and the MJXL. Some discussion on the new MJ4A Control Panel. |
Recommended for Operations,
Metering and Engineering personnel. If you have a spare MJX and/or MJXL
panel that you would like to bring with you to follow along with Mark,
please feel free to do so. Don't forget to bring a cheater cord to power
up the unit. We will have the new panel software updates as well. This class will be informative even for those who do not use Siemens regulators, as we will learn about what makes up a regulator. |
BESco Technical Services Staff
with Mark Mande from Siemens |
5/14/08 |
Brownstown, IN |
6/20/08 - 7:30
am - 2:00 pm |
Single & Poly Phase Meter
Installations & Wiring Methods |
Back By Popular Demand!
This class is a "hands on" class. Students attending will learn
how to read metering diagrams and how to wire up single & poly phase
meter loops. - SPECIAL EVENT - Fish Fry! BESco Operations
Dept will be frying up the fish! Come and enjoy the afternoon with us! |
Recommended for Metering
personnel. Bring your wire strippers and needle nose pliers! |
BESco Technical Services Staff |
6/18/08 |
Brownstown, IN |
No more limitations to seating capacity! Please bring all from
your utility that would benefit from these classes! All classes start at 8:30am and are usually over at 2:00pm unless
noted differently. All classes will be held in the Brownstown Electric
Supply Co Technical Center (TSD) at our Brownstown, Indiana location.
Lunches are provided by Brownstown Electric Supply Co.
Local hotel information provided below... call early, rooms go fast! Please RSVP to Mrs. Lisa Hamilton to confirm availability for BROWNSTOWN, IN classes at 800-742-8492. Please RSVP to Mr. Kent Adkins to confirm availability for LAWRENCEBURG, KY classes at 800-950-9931. NOTE: These dates are updated regularly, however they are subject to change or cancellation as circumstances transpire Should you wish to view last years meetings please click HERE.
812-523-2409 812-522-6767 812-523-1850 LOCAL LAWRENCEBURG HOTEL INFORMATION
|
Home
| History In Brief
| Vision Statement
| Facilities |
Services | Sales
Email | TSD Sales |
Contact Purchasing |
||
|
Fax: 812-358-2484 Email: webmaster@brownstown.com |
||
|
690 East State Road 250 Brownstown, IN 47220 |
||